Contact |
Arrangement |
1 Form C |
Initial contact resistance, max. |
Max. 50 m ohm (By voltage drop of 6V DC 1A) |
Contact material |
Ag+Au clad |
Rating |
Nominal switching capacity |
2 A 30 V DC (resistive load) |
Max. switching power |
60 W (DC) (resistive load) |
Max. switching voltage |
220 V DC |
Max. switching current |
2 A |
Min. switching capacity (Reference value)*1 |
10µA 10mV DC |
Nominal operating power |
Single side stable |
140 mW (1.5 to 12 V DC), 270 mW (24 V DC) |
1 coil latching |
100 mW (1.5 to 12 V DC), 150 mW (24 V DC) |
2 coil latching |
200 mW (1.5 to 9 V DC), 250 mW (12 V DC), 400 mW (24 V DC) |
Electrical characteristics |
Insulation resistance (Initial) |
Min. 1,000M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section. |
Breakdown voltage (Initial) |
Between open contacts |
750 Vrms for 1 min. (Detection current: 10 mA) |
Between contact and coil |
1,500 Vrms for 1 min. (Detection current: 10 mA) |
Surge breakdown voltage (Initial) |
Between open contacts |
1,500 V (10×160µs) (FCC Part 68) |
Between contacts and coil |
2,500 V (2×10µs) (Telcordia) |
Temperature rise (at 20 °C 68 °F) |
Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.) |
Operate time [Set time] (at 20°C 68°F) |
Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) |
Release time [Reset time] (at 20°C 68°F) |
Max. 2 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)(without diode) |
Mechanical characteristics |
Shock resistance |
Functional |
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.) |
Destructive |
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.) |
Vibration resistance |
Functional |
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10μs.) |
Destructive |
10 to 55 Hz at double amplitude of 5 mm |
Expected life |
Mechanical |
Min. 108 (Single side stable), Min. 5 ×107 (1 or 2 coil latching) (at 180 cpm) |
Electrical |
Min. 105 (2 A 30 V DC resistive) (at 20 cpm) |
Conditions |
Conditions for operation, transport and storage *2 |
Ambient temperature: –40°C to +85°C –40°F to +185°F *3 Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) |
Max. operating speed (at rated load) |
20 cpm |
Unit weight |
|
Approx. 1 g .035 oz |