| Contact |
Arrangement |
1 Form C |
2 Form C |
| Initial contact resistance, max. |
Max. 50 m ohm (By voltage drop of 6V DC 1A) |
| Contact material |
Ag+Au clad |
| Rating |
Nominal switching capacity |
2 A 30 V DC (resistive load) |
| Max. switching power |
60 W,125 VA (resistive load) |
| Max. switching voltage |
220 V DC, 250 V AC |
| Max. carrying current |
3 A |
| Min. switching capacity (Reference value)*1 |
10μA 10mV DC |
| Nominal operating power |
Single side stable (M type: 400 mW, S type: 200 mW);
Latching (M type: 360 mW, S type: 180 mW) |
| Electrical characteristics |
Insulation resistance (Initial) |
Min. 1,000M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section. |
| Breakdown voltage (Initial) |
Between open contacts |
1,000 Vrms for 1min. (500 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) |
| Between contact and coil |
1,500 Vrms for 1min. (1,000 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.) |
| Temperature rise |
Max. 65 °C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.) |
| Operate time [Set time] (at 20°C 68°F) |
Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.) |
| Release time [Reset time] (at 20°C 68°F) |
Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)(without diode) |
| Mechanical characteristics |
Shock resistance |
Functional *2 |
Min. 490 m/s2 |
Min. 490 m/s2 |
| Destructive |
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.) |
| Vibration resistance |
Functional |
10 to 55 Hz at double amplitude 3.3 mm (Detection time: 10μs.) |
| Destructive |
10 to 55 Hz at double amplitude of 5 mm |
| Expected life |
Mechanical |
Min. 108 (107: 1 Form C latching type) (at 600 cpm) |
| Electrical |
Min. 5 × 105 rated load (at 60 cpm) |
| Conditions |
Conditions for operation, transport and storage *2 |
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature) |
| Max. operating speed (at rated load) |
60 cpm |
| Unit weight |
|
Approx. 3 g .11 oz |
Approx. 4 g .14 oz |
