상단배너1 상단배너2 검색창위배너 검색창아래이벤트배너 좌측고객센터배너 qna게시판 링크 Step1 Step2 Step3 Step4 전기 자동제어 부품 전기 배선 부품 태양광 배전 부품 자가발전 세트 IoT 자동화 소자부품 전선용 마감재 전문관 태양광 모듈 제품 제품용 미니솔라 콘트롤분전반 제작 아크릴박스명판 타공외타공 메탈절곡 아노다이징가공 DIY 구성과정 SMD, 포장, 완제품, 샘플제작 설비 랙, 캐비닛, 콘솔 샘플제작 스타트업주문관 KAKON 스위치 KAKON F.A Panasonic F.A 한국리레이 신화울트론 OTAX DSFOX FORWARD COSMO 세광전자 도원전기 QiAOH C3C HKE BOXCO Autonics 동일전선 우성일렉스 ONPOW 자연에너지 한국리레이 ROCKET PLUG SolarCenter TES YINGDE SOLAR Power Master JINHEUNG ELECTRIC ATLASBX STUDER PM SOLAR CLCDM PCE JSPV 1.DC콘트롤 2.AC콘트롤 1.릴레이/SSR 2.타이머 3.직부등 4.부스바 5.시그널램프 6.손잡이 노브 7.FAN 8.집합표시등 9.슬라이닥스 10.
용

11.케이블그랜드(락커) 12.케이블닥트 13.정전전압기 14.서지보호기 15.LED 표시등 16.전원선&인렛 17.단자대 18.수위조절기 19.온토콘트롤러 20.휴즈홀더/휴즈 21.메타기기 (전류,전압,전력,아워메타) 22.시그널 타워 및 경광등 23.시그널폰/부저 (음성경보기) 24.AC 콘센트, 코드커넥터 1.도어스위치 2.점멸스위치 3.온도스위치 4.메인스위치 5.전원스위치 6.안전스위치 7.유량스위치 8.BOX형 스위치 9.차단스위치 10.압력스위치 11.토클스위치 12.기동용스위치 13.로타리스위치 14.세렉터스위치 15.발판스위치 16.캠 스위치 17.딥 스위치 18.마이크로스위치 19.메탈스위치 20.리미트스위치 21.Φ8,10,12 푸쉬스위치 22.Φ16 푸쉬스위치 23.Φ19,22,25,30 푸쉬스위치 24.락커스위치 1.전선AC브레드코드 (컴퓨터선) 2.저선2선이상 VCTF 3.전선 단선 조작용 KLV 4.전선 옥외노출용 CV 5.전선 5색, 10색 6.전선용 접속콘넥터 7.전선용 접속단자 8.전선용 케이블타이 9.전선용 절연튜브 10.전선용 구별자재 11.가정용 AC멀티탭 12.산업용 소켓, 플러그 1.유니온 전자통신 2.신성계전 3.통신공사 용품전문관 1.배전용파이박스 2.랙,엔클로져 1.작업분 결제 서비스관
today view

0

    prev
    /
    next
    상품번호 : 1037977
    페이스북 트위터 
    1AMP 2A2B TQ2-12V 파나소닉 시그널 리레이-인증 UL,CSA
    판매가 1,100
    무이자할부
    무이자할부 카드안내 X
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    3~12개월 5만원이상
    배송 택배 3,500원
    브랜드 Panasonic
    고객평가 1건  ★★★★★ 5/5
    특이사항 인증 UL,CSA
    제조사 Panasonic
    제조위치 MADE IN THAILAND
    제품모델 RELAY
    수량
    총 상품금액 1,100

    1. Standard PC board terminal and self-clinching terminal types

    Coil data (at 20°C 68°F)

    Standard (B.B.M.) type

    Single side stable type (2 Form C)

    Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. applied voltage
    3V DC 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 46.7mA 64.3 ohm 140mW 150%V of nominal voltage
    4.5V DC 31.1mA 144.6 ohm
    5V DC 28.1mA 178 ohm
    6V DC 23.3mA 257 ohm
    9V DC 15.5mA 579 ohm
    12V DC 11.7mA 1,028 ohm
    24V DC 8.3mA 2,880 ohm 200mW
    48V DC 6.25mA 7,680 ohm 300mW 120%V of nominal voltage

    1 coil latching type (2 Form C)

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance [±10%] Nominal operating power Max. applied voltage
    3V DC 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 33.3mA 90 ohm 100mW 150%V of nominal voltage
    4.5V DC 22.2mA 202.5 ohm
    5V DC 20mA 250 ohm
    6V DC 16.7mA 360 ohm
    9V DC 11.1mA 810 ohm
    12V DC 8.3mA 1,440 ohm
    24V DC 6.3mA 3,840 ohm 150mW

    2 coil latching type (2 Form C)

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. applied voltage
    Set coil Reset coil Set coil Reset coil Set coil Reset coil
    3V DC 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) 66.7mA 66.7mA 45 ohm 45 ohm 200mW 200mW 150%V of nominal voltage
    4.5V DC 44.4mA 44.5mA 101.2 ohm 101.2 ohm
    5V DC 40mA 40mA 125 ohm 125 ohm
    6V DC 33.3mA 33.3mA 180 ohm 180 ohm
    9V DC 22.2mA 22.2mA 405 ohm 405 ohm
    12V DC 16.7mA 16.7mA 720 ohm 720 ohm
    24V DC 12.5mA 12.5mA 1,920 ohm 1,920 ohm 300mW 300mW 120%V of nominal voltage

    Single side stable type (4 Form C)

    Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance [±10%] Nominal operating power Max. applied voltage
    3V DC 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 93.8mA 32 ohm 280mW 150%V of nominal voltage
    4.5V DC 62.2mA 72.3 ohm
    5V DC 56.2mA 89 ohm
    6V DC 46.5mA 129 ohm
    9V DC 31.1mA 289 ohm
    12V DC 23.3mA 514 ohm
    24V DC 11.7mA 2,056 ohm
    48V DC 8.3mA 5,760 ohm 400mW 120%V of nominal voltage

    1 coil latching type (4 Form C)

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance [±10%] Nominal operating power Max. applied voltage
    3V DC 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 66.6mA 45 ohm 200mW 150%V of nominal voltage
    4.5V DC 44.4mA 101.2 ohm
    5V DC 40mA 125 ohm
    6V DC 33.3mA 180 ohm
    9V DC 22.2mA 405 ohm
    12V DC 16.7mA 720 ohm
    24V DC 8.3mA 2,880 ohm

    2 coil latching type (4 Form C)

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. applied voltage
    Set coil Reset coil Set coil Reset coil Set coil Reset coil
    3V DC 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) 133mA 133mA 22.5 ohm 22.5 ohm 400mW 400mW 150%V of nominal voltage
    4.5V DC 88.9mA 88.9mA 50.6 ohm 50.6 ohm
    5V DC 80mA 80mA 62.5 ohm 62.5 ohm
    6V DC 66.6mA 66.6mA 90 ohm 90 ohm
    9V DC 44.4mA 44.4mA 202.5 ohm 202.5 ohm
    12V DC 33.3mA 33.3mA 360 ohm 360 ohm
    24V DC 16.7mA 16.7mA 1,440 ohm 1,440 ohm
    * Pulse drive (JIS C 5442-1986)

    M.B.B. type

    Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance [±10%] Nominal operating power Max. applied voltage
    3V DC 80%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 66.7mA 45 ohm 200mW 150%V of nominal voltage
    4.5V DC 44.4mA 101 ohm
    5V DC 40mA 125 ohm
    6V DC 33.3mA 180 ohm
    9V DC 22.2mA 405 ohm
    12V DC 16.7mA 720 ohm
    24V DC 8.3mA 2,880 ohm
    * Pulse drive (JIS C 5442-1986)

    Return to top

    Specifications

    Characteristics Item Specifications
    Contact Arrangement 2 Form C, 2 Form D (M.B.B.) 4 Form C
    Initial contact resistance, max. Max. 50 m ohm (By voltage drop of 6V DC 1A)
    Contact material Ag+Au clad
    Rating Nominal switching capacity 1 A 30 V DC, 0.5A 125V AC *1 (resistive load)
    Max. switching power 30 W (DC), 62.5VA (AC) *1 (resistive load)
    Max. switching voltage 110 V DC , 125V AC*1
    Max. switching current 1 A
    Min. switching capacity (Reference value)*2 10µA 10mV DC
    Nominal operating power Single side stable Standard (B.B.M) type : 140 mW (3 to 12 V DC), 200 mW (24 V DC), 300mW(48V DC)
    M.B.B. type : 200mW
    280mW (3 to 24 V DC), 400mW (48 V DC)
    1 coil latching 100 mW (3 to 12 V DC), 150mW (24 V DC) 200mW
    2 coil latching 200 mW (3 to 12 V DC), 300mW (24 V DC) 400mW
    Electrical characteristics Insulation resistance (Initial) Min. 1,000M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
    Breakdown voltage (Initial) Between open contacts

    Standard (B.B.M) type : 750 Vrms for 1 min. (Detection current: 10 mA)
    M.B.B. type : 300 Vrms for 1 min. (Detection current: 10 mA)

    Between contact and coil 1,000 Vrms for 1 min. (Detection current: 10 mA)
    Between contact sets 1,000 Vrms for 1 min. (Detection current: 10 mA)
    Temperature rise (at 20 °C 68 °F) Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
    Operate time [Set time] (at 20°C 68°F) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
    Release time [Reset time] (at 20°C 68°F) Max. 3 ms [Max. 3 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)(without diode)
    Mechanical characteristics Shock resistance Functional Min. 490 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
    Destructive Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
    Vibration resistance Functional 10 to 55 Hz at double amplitude 3 mm (Detection time: 10μs.)
    Destructive 10 to 55 Hz at double amplitude of 5 mm
    Expected life Mechanical (at 180 cpm) Standard (B.B.M) type : Min. 108
    M.B.B. type : Min. 107
    Electrical (at 20 cpm) Standard (B.B.M) type : Min. 2 ×105 (1 A 30 V DC resistive) , Min. 105 (0.5 A 125 V AC resistive)
    M.B.B. type : Min. 105 (1 A 30 V DC resistive)
    Conditions Conditions for operation, transport and storage *3 Standard (B.B.M) type :
    Ambient temperature: –40°C to +70°C –40°F to +158°F
    Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
    M.B.B. type :
    Ambient temperature: –40°C to +50°C –40°F to +122°F
    Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
    Max. operating speed (at rated load) 20 cpm
    Unit weight   Approx. 1.5 g .053 oz Approx. 3 g .106 oz
    *1 AC is standard (B.B.M) type only.
    *2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
    *3 Refer to "6. AMBIENT ENVIRONMENT/ 6. Usage, strage and transport conditions".

    Return to top

    2. Surface-mount terminal types

    Coil data (at 20°C 68°F)

    Single side stable type

    Nominal coil voltage Pick-up voltage Drop-out voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. applied voltage
    1.5V DC 75%V or less of nominal voltage* (Initial) 10%V or more of nominal voltage* (Initial) 93.8mA 16 ohm 140mW 150%V of nominal voltage
    3V DC 46.7mA 64.3 ohm
    4.5V DC 31mA 145 ohm
    5V DC 28.1mA 178 ohm
    6V DC 23.3mA 257 ohm
    9V DC 15.5mA 579 ohm
    12V DC 11.7mA 1,028 ohm
    24V DC 8.3mA 2,880 ohm 200mW
    48V DC 6.3mA 7,680 ohm 300mW 120%V of nominal voltage

    1 coil latching type

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance [±10%] Nominal operating power Max. applied voltage
    1.5V DC 75%V or less of nominal voltage* (Initial) 75%V or less of nominal voltage* (Initial) 46.9mA 32 ohm 70mW 150%V of nominal voltage
    3V DC 23.3mA 128.6 ohm
    4.5V DC 15.6mA 289.3 ohm
    5V DC 14mA 357 ohm
    6V DC 11.7mA 514 ohm
    9V DC 7.8mA 1,157 ohm
    12V DC 5.8mA 2,057 ohm
    24V DC 4.2mA 5,760 ohm 100mW

    2 coil latching type

    Nominal coil voltage Set voltage Reset voltage Nominal operating current [±10%] Coil resistance[±10%] Nominal operating power Max. applied voltage
    Set coil Reset coil Set coil Reset coil Set coil Reset coil
    1.5V DC 75%V or less of nominal voltage (Initial) 75%V or less of nominal voltage (Initial) 93.8mA 93.8mA 16 ohm 16 ohm 140mW 140mW 150%V of nominal voltage
    3V DC 46.7mA 46.7mA 64.3 ohm 64.3 ohm
    4.5V DC 31mA 31mA 145 ohm 145 ohm
    5V DC 28.1mA 28.1mA 178 ohm 178 ohm
    6V DC 23.3mA 23.3mA 257 ohm 257 ohm
    9V DC 15.5mA 15.5mA 579 ohm 579 ohm
    12V DC 11.7mA 11.7mA 1,028 ohm 1,028 ohm
    24V DC 8.3mA 8.3mA 2,880 ohm 2,880 ohm 200mW 200mW
    * Pulse drive (JIS C 5442-1986)

    Return to top

    Specifications

    Characteristics Item Specifications
    Contact Arrangement 2 Form C
    Initial contact resistance, max. Max. 75 m ohm (By voltage drop of 6V DC 1A)
    Contact material AgNi type +Au clad
    Rating Nominal switching capacity (resistive load) 2 A 30 V DC, 0.5A 125V AC
    Max. switching power (resistive load) 60 W (DC), 62.5VA (AC)
    Max. switching voltage 220 V DC , 125V AC
    Max. switching current 2 A
    Min. switching capacity (Reference value)*1 10µA 10mV DC
    Nominal operating power Single side stable 140 mW (1.5 to 12 V DC), 200 mW (24 V DC), 300mW(48V DC)
    1 coil latching 70 mW (1.5 to 12 V DC), 100mW (24 V DC)
    2 coil latching 140 mW (1.5 to 12 V DC), 200mW (24 V DC)
    Electrical characteristics Insulation resistance (Initial) Min. 1,000M ohm (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
    Breakdown voltage (Initial) Between open contacts

    1,000 Vrms for 1 min. (Detection current: 10 mA)

    Between contact and coil 1,500 Vrms for 1 min. (Detection current: 10 mA)
    Between contact sets 1,500 Vrms for 1 min. (Detection current: 10 mA)
    Surge breakdown voltage (initial) Between open contacts

    1,500 V (10 × 160μs) (FCC Part 68)

    Between contacts and coil 2,500 V (2 × 10μs) (Bellcore)
    Temperature rise (at 20 °C 68 °F) Max. 50°C (By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
    Operate time [Set time] (at 20°C 68°F) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
    Release time [Reset time] (at 20°C 68°F) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)(without diode)
    Mechanical characteristics Shock resistance Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10μs.)
    Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
    Vibration resistance Functional 10 to 55 Hz at double amplitude 3.3 mm (Detection time: 10μs.)
    Destructive 10 to 55 Hz at double amplitude of 5 mm
    Expected life Mechanical (at 180 cpm) Min. 108
    Electrical (at 20 cpm) 105 (2 A 30 V DC resistive) , Min. 2 × 105 (1 A 30 V DC resistive), Min. 105 (0.5 A 125 V AC resistive)
    Conditions Conditions for operation, transport and storage *3 Ambient temperature: –40°C to +85°C –40°F to +185°F
    Max. –40°C to +70°C (2A) Max. –40°F to +158°F (2A);
    Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
    Max. operating speed (at rated load) 20 cpm
    Unit weight   Approx. 2 g .071 oz
    *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
    *2

    Refer to "6. AMBIENT ENVIRONMENT/ 6. Usage, strage and transport conditions".

     

    1.Standard PC board terminal and Self clinching terminal

    2 Form C


    External dimensions
    Standard PC board terminal

    General tolerance: ±0.3
    General tolerance: ±.012

    External dimensions
    Self clinching terminal

    General tolerance: ±0.3
    General tolerance: ±.012

    PC board pattern (Bottom view)

    Tolerance: ±0.1
    Tolerance: ±.004

    Schematic (Bottom view)
    Single side stable

    (Deenergized condition)

    Schematic (Bottom view)
    1 coil latching

    (Reset condition)

    Schematic (Bottom view)
    2 coil latching

    (Reset condition)

    • Standard PC board terminal Single side stable : atq203.dxf Download
    • Standard PC board terminal 1 coil latching : atq213.dxf Download
    • Standard PC board terminal 2 coil latching : atq223.dxf Download
    • Self clinching terminal Single side stable : atq233.dxf Download
    • Self clinching terminal 1 coil latching : atq243.dxf Download
    • Self clinching terminal 2 coil latching : atq253.dxf Download

    4 Form C


    External dimensions
    Standard PC board terminal

    General tolerance: ±0.3
    General tolerance: ±.012

    External dimensions
    Self clinching terminal

    General tolerance: ±0.3
    General tolerance: ±.012

    PC board pattern (Bottom view)

    Tolerance: ±0.1
    Tolerance: ±.004

    Schematic (Bottom view)
    Single side stable

    (Deenergized condition)

    Schematic (Bottom view)
    1 coil latching

    (Reset condition)

    Schematic (Bottom view)
    2 coil latching

    (Reset condition)

    • Standard PC board terminal Single side stable : atq403.dxf Download
    • Standard PC board terminal 1 coil latching : atq413.dxf Download
    • Standard PC board terminal 2 coil latching : atq423.dxf Download
    • Self clinching terminal Single side stable : atq433.dxf Download
    • Self clinching terminal 1 coil latching : atq443.dxf Download
    • Self clinching terminal 2 coil latching : atq453.dxf Download

    Return to top

    2. Surface-mount terminal


    SA type

    External dimensions

    General tolerance: ±0.3
    General tolerance: ±.012

    Suggested mounting pad (Top view)

    Tolerance: ±0.1
    Tolerance: ±.004

    Schematic (Top view)
    Single side stable

    (Deenergized condition)

    Schematic (Top view)
    1 coil latching

    (Reset condition)

    Schematic (Top view)
    2 coil latching

    (Reset condition)

    • Single side stable : atq203sa.dxf Download
    • 1 coil latching : atq213sa.dxf Download
    • 2 coil latching : atq223sa.dxf Download

    SL type

    External dimensions

    General tolerance: ±0.3
    General tolerance: ±.012

    Suggested mounting pad (Top view)

    Tolerance: ±0.1
    Tolerance: ±.004

    Schematic (Top view)
    Single side stable

    (Deenergized condition)

    Schematic (Top view)
    1 coil latching

    (Reset condition)

    Schematic (Top view)
    2 coil latching

    (Reset condition)

    • Single side stable : atq203sl.dxf Download
    • 1 coil latching : atq213sl.dxf Download
    • 2 coil latching : atq223sl.dxf Download

    SS type

    External dimensions

    General tolerance: ±0.3
    General tolerance: ±.012

    Suggested mounting pad (Top view)

    Tolerance: ±0.1
    Tolerance: ±.004

    Schematic (Top view)
    Single side stable

    (Deenergized condition)

    Schematic (Top view)
    1 coil latching

    (Reset condition)

    Schematic (Top view)
    2 coil latching

    (Reset condition)

    • Single side stable : atq203ss.dxf Download
    • 1 coil latching : atq213ss.dxf Download
    • 2coil latching : atq223ss.dxf Download

    Return to top




    WWW
    http://hanelecon.com/

    community board

    회사명 : 한텍 / 사업장소재지 : 서울특별시 종로구 인의동 112-2 세운스퀘어 별관 2층 222호 / 대표자 : 한영수
    고객만족센터 : 02-2269-1877 / FAX : 02-2269-0310 / E-MAIL :(hanelecon@hanelecon.com)
    사업자등록번호: 101-03-86433 [사업자정보확인] / 통신판매업신고: 제2016-서울종로-0718호 / 개인정보책임자: 김도현(hanelecon@hanelecon.com)

    Copyright by 한텍 All rights reserved. www.morenvy.com

    kcp 에스크로
    회원님의 소중한 개인정보 보호를 위해 비밀번호를 주기적으로 변경하시는 것이 좋습니다.
    현재 비밀번호
    신규 비밀번호
    신규 비밀번호 확인
    6~20자, 영문 대소문자 또는 숫자 특수문자 중 2가지 이상 조합